Ethernity in the News

New Ethernet Adapter to Accelerate Network and Security Performance

SEMICONDUCTOR REVIEW

A new Ethernet controller FPGA engine is stepping towards supporting the current and future customers that are demanding further disaggregation of their 5G networks.

Read More

Ethernity Boasts of New North American Customer

Light Reading

Ethernity will supply its ENET Switch and Traffic Manager firmware to support performance of 200Gbps on customer’s new xPON optical light termination (OLT) device. The customer intends to deploy its new OLT platform in H2/2021. Given the popularity of the platform and the size of the OEM, the new product is anticipated to generate significant ongoing royalty streams for the Company, added to significant short-term revenue as detailed in a newly signed contract.

Read More

Ethernity Networks unveils ENET-D

Light Reading

ENET-D is an Ethernet adapter and DMA (direct memory access) engine that eliminates the need for proprietary hardware on a network interface card. By fitting into various FPGAs and enabling customers to further avoid ASIC-based components, ENET-D advances complete disaggregation at the edge of the network.

Read More

Planning the Next-Generation Central Office

Lightwave

A cloud-based edge computing approach has been guiding us toward the future of networking for several years, but only now are providers really focusing on distributing compute resources to improve service quality and security while adding agility and scalability. The central office is the initial focus of this transition.

Read More

FiberHome leverages Ethernity Networks’ ACE-NIC100 FPGA SmartNIC for FitBNG broadband network gateway

Lightwave

The Chinese communications systems house will use the SmartNIC to bring better performance to its FitBNG broadband network gateway. The ACE-NIC100 is designed to enable hardware acceleration. The broadband network gateway design will integrate FiberHome’s BNG software with Ethernity’s SmartNIC hardware.

Read More

Ethernity Networks soars on Chinese deal

Globes

Communications equipment manufacturer FiberHome will use Ethernity’s programmable hardware in its product. Ethernity Networks’ share price skyrocketed 74.6% yesterday and 25% today, after Ethernity Networks reported signing a contract with Chinese communications equipment manufacturer FiberHome.

Read More

FiberHome selects Ethernity’s FPGA SmartNIC

Converge! Network Digest

FiberHome Telecommunication Technologies, a major Chinese networking and telecommunication equipment provider, has selected Ethernity Networks’ ACE-NIC100 FPGA SmartNIC for implementation within its latest FitBNG Broadband Network Gateway (BNG) product.

Read More

Ethernity Networks expects to soon close on two "transformational" deals

YouTube

Ethernity Networks CEO David Levi talks Proactive London’s Andrew Scott through their 2018 results. Levi expects the firm to start generating cash from 2020 as momentum builds for its new generation of modules. Ethernity’s technology helps servers run much faster through the efficient ‘offloading’ and rerouting of internet traffic.

View

Ethernity releases network appliance optimized for the edge

DataCenterNews Asia

According to Ethernity Networks VP of R&D Shavit Baruch, it is exciting to bring customers an edge solution: “After many years of delivering Carrier Ethernet over low-cost, low-power FPGAs, it is exciting to have customers requesting that we apply our field-proven expertise and patented technology to a comprehensive solution for the network edge.”

Read More

Ethernity Networks Releases a Modular Programmable Universal Edge Platform

The 5G Exchange (powered by Light Reading)

Ethernity Networks today introduced its ENET Universal Edge Platform (UEP) network appliance, an edge-optimized low-space, low-power FPGA-based programmable device with up to 40Gbps of networking capacity and 10Gbps of IPSec security performance.

Read More

Ethernity delivers Programmable Universal Edge Platform

Converge! Network Digest

Ethernity Networks introduced its ENET Universal Edge Platform (UEP) network appliance, an edge-optimized low-space, low-power FPGA-based programmable device with up to 40 Gbps of networking capacity and 10 Gbps of IPSec security performance.

Read More

The Future of the Central Office

ISE (ICT Solutions & Education)

A cloud-based approach to telecom networks has been the consensus approach toward the future of networking for nearly 5 years. The central office (CO) at the CSP network edge is now the focus for the initial application of this transition. When all traffic is aggregated to the CO, it creates a bottleneck that can cause a variety of problems, especially in an environment that demands 5G and heightened security.

Read More

Ethernity Networks offers programmable, secure ENET VPN Gateway

Lightwave

The ENET VPN gateway offers programmability via its FPGA-based design. The system also leverages the FPGA to support the use of open source management software as well as an IPSec VPN solution, which offloads security functions from the CPU to the FPGA and uses Host Bypass to provide better security at lower cost than competing alternatives.

Read More

Ethernity ENET vRouter Aimed at a Programmable Network Bottleneck

SDxCentral

This week, Ethernity Networks introduced its ENET vRouter, a programmable network appliance that enables 100 Gbps routing. The platform divides the control layer and the data layer, handling them in a way that makes sense for each. The platform consists of the vRouter software and ACE-NIC1000 FPGA SmartNIC in a COTS server.

Read More

Ethernity Networks introduces ENET vRouter network appliance

Telecompaper

Ethernity Networks introduced its ENET vRouter network appliance, enabling 100Gbps routing functionality in inexpensive commercial off-the-shelf (COTS) servers. It’s suited for communications service providers, ISPs, and enterprise data centre administrators designing next-generation programmable networks.

Read More

Ethernity Networks Introduces 100G ACE-NIC100 FPGA-based SmartNIC

Connect-World

ACE-NIC100 comes with 10G, 25G, 40G, and 100G interface configurations and includes an all-programmable FPGA equipped with Ethernity’s patented ENET Flow Processor firmware. This enables support for high bandwidth applications over COTS servers to enable the next-generation network edge, mobile 5G, and the telco cloud.

Read More

Ethernity Networks Providing Solutions to Network Edge Challenges

Light Reading

David Levi, CEO of Ethernity Networks, discusses how Ethernity is solving the performance problems revolving around the data center and how they’re providing solutions to problems the network edge presents.

Read More

2 ‘Under the Radar’ Growth Stocks that Could Make You Brilliantly Rich

The Motley Fool

The City expects earnings to boom at Ethernity in the medium term at least, and this is no surprise — after all, the rapidly-increasing data volumes that need to be processed and sorted provide terrific sales opportunities for the business. And the serious glances the firm’s technology is garnering from major telecoms providers is particularly encouraging.

Read More

Ethernity Networks up 36% in Two Weeks Since IPO

Globes

The competitive advantage of Ethernity’s patent-protected solution lies in the silicon surface it uses, which is 80% smaller than that used by the competition, “and in the speed of code-writing.” In other words, Levi says, Ethernity’s solution is both faster and cheaper.

Read More

Ethernity Network Delivers Instant Offloading of Network Functions with NIC

YouTube

Utilizing the company’s patented network processing technology, Ethernity offers data path offloading to FPGA. The offloading accelerates networking performance by 50 times, provides low latency and low power consumption.

View

Ethernity Networks' London Stock Exchange Placing Puts $58M Value On Tech “Game Changer”

Forbes

Shares in Ethernity Networks were admitted to the London Stock Exchange’s (LSE) AIM Market today in an “oversubscribed placing” that raised gross proceeds of £15 million (c.$19.2m), which will be invested in developing the firm’s existing product range further and increased R&D activities.

View

Ethernity Raises £15M From London IPO

Light Reading

Ethernity Networks has raised £15 million (US$19.5 million) from an IPO on London’s Alternative Investment Market (AIM) and says the funds will help it meet demand from major systems vendors that want to build their products around its data processing capabilities.

Read More

Ethernity Networks Raises $19.2m in AIM IPO

Globes

Ethernity Networks (AIM: ENET.L) has raised £15 million ($19.2 million) on London’s AIM. Arden Partners was sole bookrunner for the IPO. The IPO was based on a total of 32,518,186 new and previously existing shares. The shares traded at £1.40 each ($1.80) giving the Lod based company a valuation of £45 million ($58 million).

Read More